Solar driven nitrous acid formation on building material surfaces containing titanium dioxide: A concern for air quality in urban areas?

The photoenhanced uptake of nitrogen dioxide (NO₂) to the surface of commercially available self-cleaning window glass has been studied under controlled laboratory conditions. This material is one of an array of modern building products which incorporate titanium dioxide (TiO₂) nanoparticles and are finding increasing use in populated urban areas. Amongst the principal drivers for the use of these materials is that they are thought to facilitate the irreversible removal of pollutants such as NO₂ and organic molecules from the atmosphere and thus act to remediate air quality. While it appears that TiO₂ materials do indeed remove organic molecules from built environments, in this study we show that the photoenhanced uptake of NO₂ to one example material, self-cleaning window glass, is in fact accompanied by the substantial formation (50–70%) of gaseous nitrous acid (HONO). This finding has direct and serious implications for the use of these materials in urban areas. Not only is HONO a harmful respiratory irritant, it is also readily photolysed by solar radiation leading to the formation of hydroxyl radicals (OH) together with the re-release of NO_x as NO. The net effect of subsequent OH initiated chemistry can then be the further degradation of air quality through the formation of secondary pollutants such as ozone and VOC oxidation products. In summary, we suggest that a scientifically conceived technical strategy for air quality remediation based on this technology, while widely perceived as universally beneficial, could in fact have effects precisely opposite to those intended.     

Estimating the aquatic emissions and fate of perfluorooctane sulfonate (PFOS) into the river Rhine

The sources, distribution, levels and sinks of perfluorooctane sulfonate (PFOS) estimated to be released from areas of high population density, have been explored using the river Rhine as a case study. A comparison between modelled and measured data is presented, along with analysis of the importance of PFOS sorption in riverine systems. PFOS releases into the Rhine were estimated to be 325-690 kg/yr based on per capita emission rates of 27-57 μg day(-1) from a population of 33 million living within a 50 km zone either side of the river. Sorption of PFOS to suspended particles and sediments may alter its fate in the aquatic environment. Therefore available measured and modelled partitioning data was assessed, and K(d) values (sorption coefficient) of 7.5 and 20 were selected. This resulted in sediment-water ratios of 23-76 : 1, which are similar to ratios reported in the literature, and resulted in modelled estimates that <20% of the total PFOS entering the Rhine binds to sediments or suspended particles. The calculated discharge from the Rhine to the North Sea based on measured data was 420-2200 kg/yr; our model predictions are in good agreement with these estimates. Emission trends were accurately predicted, suggesting population density can be effectively used as a surrogate for diffuse PFOS emissions from product use, while predicted concentrations were a factor of 2-4 below measured data showing the importance of other sources. Transfer of PFOS to sediment is estimated to be minimal, and consequently discharges to the North Sea are roughly equal to PFOS releases to river water.     

A quantitative integrated assessment of pollution prevention achieved by Integrated Pollution Prevention Control licensing

This paper presents an innovative, quantitative assessment of pollution avoidance attributable to environmental regulation enforced through integrated licensing, using Ireland's pharmaceutical-manufacturing sector as a case study. Emissions data reported by pharmaceutical installations were aggregated into a pollution trend using an Environmental Emissions Index (EEI) based on Lifecycle Assessment methodologies. Complete sectoral emissions data from 2001 to 2007 were extrapolated back to 1995, based on available data. Production volume data were used to derive a sectoral production index, and determine ‘no-improvement’ emission trends, whilst questionnaire responses from 20 industry representatives were used to quantify the contribution of integrated licensing to emission avoidance relative to these trends. Between 2001 and 2007, there was a 40% absolute reduction in direct pollution from 27 core installations, and 45% pollution avoidance relative to hypothetical ‘no-improvement’ pollution. It was estimated that environmental regulation avoided 20% of ‘no-improvement’ pollution, in addition to 25% avoidance under business-as-usual. For specific emissions, avoidance ranged from 14% and 30 kt a^− 1 for CO₂ to 88% and 598 t a^− 1 for SO_x. Between 1995 and 2007, there was a 59% absolute reduction in direct pollution, and 76% pollution avoidance. Pollution avoidance was dominated by reductions in emissions of VOCs, SO_x and NO_x to air, and emissions of heavy metals to water. Pollution avoidance of 35% was attributed to integrated licensing, ranging from between 8% and 2.9 t a^− 1 for phosphorus emissions to water to 49% and 3143 t a^− 1 for SO_x emissions to air. Environmental regulation enforced through integrated licensing has been the major driver of substantial pollution avoidance achieved by Ireland's pharmaceutical sector — through emission limit values associated with Best Available Techniques, emissions monitoring and reporting requirements, and performance targets specified in environmental management plans. This compliant sector offers a positive, but not necessarily typical, case study of IPPC effectiveness.     

The LUCAS topsoil database and derived information on the regional variability of cropland topsoil properties in the European Union

Approximately 20,000 topsoil samples were collected in 25 European Union (EU) Member States (EU-27 except Bulgaria and Romania) with the aim to produce the first coherent pan-European physical and chemical topsoil database, which can serve as baseline information for an EU wide harmonized soil monitoring. The soil sampling was undertaken within the frame of the Land Use/Land Cover Area Frame Survey (LUCAS), a project to monitor changes in the management and character of the land surface of the EU. Soil samples have been analysed for basic soil properties, including particle size distribution, pH, organic carbon, carbonates, NPK, cation exchange capacity (CEC) and multispectral signatures. Preliminary studies show the outstanding potential of the dataset for enhancing the knowledge base on soils in the EU. The current paper provides an introduction to the LUCAS Topsoil 2009 project and provides an example of data applicability for cropland assessment by highlighting initial results for regional and national comparisons.     

Post-flooding disaster crop diversity recovery: a case study of Cowpea in Mozambique

To restore food security to a traditional African cropping system following a sudden loss of seed, genetic diversity must be re-established. This study examines the extent to which Cowpea diversity was reinstated two years after a flood disaster in Gaza Province, Mozambique. The contribution that seed from various sources made to the recovery was assessed using semi-structured interviews and morphological and molecular data. Data suggest that diversity had recovered to some extent yet there was evidence of a narrowing of the genetic base, with fewer rare alleles and differences in the distribution of allele frequencies. Although the main channels for accessing seed after the flood were seed relief and markets, these sources contributed to minimal and different diversity. It appears that diversity was regained primarily through social networking in the form of loans or gifts of seed from friends and relatives. The results of the study are discussed in relation to seed relief approaches.     

Work experiences and marital interactions: Elaborating the complexity of work

Previous research suggests that work experiences affect family interactions and family processes but does not adequately specify the job characteristics that influence such family-level outcomes. This study examines relationships between the quality of marital interactions and a range of job characteristics including the level of enrichment provided by the job, job time demands, job pressure, schedule flexibility, and job insecurity. The sample consisted of 523 married full time employees at a major U.S. company. Multiple regression analysis indicated that these job characteristics significantly predict the quality of marital interactions. Some directly influenced the quality of marital interaction while the influence of others was moderated by the presence or absence of stressful household roles. Results suggest that characteristics workers' jobs, and not merely workers' reactions to them, are associated with family interactions and family processes.     

The application of local measures of spatial autocorrelation for describing pattern in north Australian landscapes

This paper tests the use of a spatial analysis technique, based on the calculation of local spatial autocorrelation, as a possible approach for modelling and quantifying structure in northern Australian savanna landscapes. Unlike many landscapes in the world, northern Australian savanna landscapes appear on the surface to be intact. They have not experienced the same large-scale land clearance and intensive land management as other landscapes across Australia. Despite this, natural resource managers are beginning to notice that processes are breaking down and declines in species are becoming more evident. With future declines of species looking more imminent it is particularly important that models are available that can help to assess landscape health, and quantify any structural change that takes place. GIS and landscape ecology provide a useful way of describing landscapes both spatially and temporally and have proved to be particularly useful for understanding vegetation structure or pattern in landscapes across the world. There are many measures that examine spatial structure in the landscape and most of these are now available in a GIS environment (e.g. FRAGSTATS* ARC, r.le, and Patch Analyst). All these methods depend on a landscape described in terms of patches, corridors and matrix. However, since landscapes in northern Australia appear to be relatively intact they tend to exist as surfaces of continuous variation rather than in clearly defined homogeneous units. As a result they cannot be easily described using entity-based models requiring patches and other essentially cartographic approaches. This means that more appropriate methods need to be developed and explored. The approach examined in this paper enables clustering and local pattern in the data to be identified and forms a generic method for conceptualising the landscape structure where patches are not obvious and where boundaries between landscape features are difficult to determine. Two sites are examined using this approach. They have been exposed to different degrees of disturbance by fire and grazing. The results show that savanna landscapes are very complex and that even where there is a high degree of disturbance the landscape is still relatively heterogeneous. This means that treating savanna landscapes as being made up of homogeneous units can limit analysis of pattern, as it can over simplify the structure present, and that methods such as the autocorrelation approach are useful tools for quantifying the variable nature of these landscapes.     

An input-output balance study for PCBs in humans

Polychlorinated biphenyl (PCB) input-output balance studies were performed on five male volunteers, aged between 24 and 30, for periods of 8-14 days in 1998. Dietary exposure was quantified by the duplicate meals method and varied between 220 and 460 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the study period. Dietary intake was dominated by congeners 118, 138, 153 and 180. Average faecal outputs for the five volunteers were 50-290 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the same period and was dominated by the same four congeners. Whilst the total PCB fluxes were therefore into the body (i.e., accumulation), important differences were noted for different individual congeners. PCBs 44, 47, 49, 52, 60, 66, 101, 105, 110, 118, 149, 151 and 183 all showed net absorption for all five volunteers. Some congeners showed a net absorption in some of the individuals but net excretion in others, as seen by other workers. These congeners (PCBs 138, 153, 180, 187 and 194) are all higher chlorinated congeners and lack meta-para-vicinal hydrogen atoms. There were differences in the net absorption/excretion between individuals, which appeared to be a function of body fat index (BFI). The volunteers with the lowest BFIs showed net excretion for the greatest number of congeners, whilst the individual with the highest BFI was a net absorber of all the congeners studied. The problems in determining and interpreting absorption efficiency values for use in quantitative exposure assessments are discussed. Various factors that influence net absorption of PCBs and other persistent organic pollutants are identified. These include compound properties (including susceptibility to metabolism), the individual's fat status and balance, exposure history and diet.